DESCRIPTION & SPECIFICATIONS

Specification ETM3VS & ETM4VS Variable Speed Turret Mill

Table Size 254 x 1370mm
Table Slot Size 16mm / 3
Table Travel (Long) 950mm
Saddle Travel (Cross) 400mm
Knee Travel (Vertical) 400mm
Quill Travel 127mm
Ram Travel 470mm
Spindle Motor 2.2KW(3HP) 3.75KW(5HP)
Spindle Taper R8 for ETM3VS, ISO 40 for ETM4VS
Quill Power Feed 0.04, 0.08, 0.15mm/rev
Spindle Speed 60-4200
Spindle to Table
Spindle to Column Min 0mm, Max 455mm
Head Tilts L/R 90
Head Tilts F/B 45
Dims. LxWxH (cm) 180x201x217
Weight 1400Kgs & 1590Kgs

Features

•Versatile Machine for Drilling – Milling & Boring operations.
• Heavy duty & sturdy Machine made with a generous-size Meehanite Casting.
• Rated for continuous use & long life expectancy.
• Made to accurate engineering tolerances by highly skilled engineers during manufacture.
• 3 HP & 5HP Motors allow larger cuts to be taken during production runs.
• R8 & 40 Int Spindle allows a large selection of standard Tooling to be used.
• Angular positioning to left/right through worm & Gear for ease.
• Reversible Switch allows the Spindle to run clockwise & anti-clockwise.
• Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible.
• DRO allows you to work in either imperial or metric calibrations.
• Hardened Slide Ways give the Machine a much longer production life.
• Quill has 3 Feed rates. It gives the option to select the correct Feed to Quill to suit your individual production requirements.
• Servo Type Variable & rapid Feeds are available for both Longitudinal & Cross Feeds.
• Motorised Up/Down Knee Movement.
• Electrically Interlocked Spindle Guard conforms to the latest CE regulations & Health & Safety Standards.

Included as standard:

• Power Feed to Quill –
3 Rates
• Servo Type Longitudinal & Cross Powerfeed.
• Motorised Knee Movement.
• One Shot Lubrication
• Coolant System
• Low Volt Machine Light
• 3 AXIS DRO.
• Electrically Interlocked Spindle Guard