Colchester Tornado T2 Two Axis CNC Lathes
P.O.A
Description
Colchester Tornado 2 axis CNC Lathe has Fanuc’s highly capable Manual Guide i control, highly customised by Colchester engineers, for quick set up times and efficient short runs. a Turning Centre that will give you capability, productivity and accuracy, but above all consistency of the finished product.
Specification |
|
| Swing over bed | 440mm |
| Spindle centre height from floor | 950mm |
| Max. machining diameter | 215mm |
| Max. turning length | 420mm |
| Spindle nose | A2-5 |
| Drawtube (bar) capacity | 46mm |
Standard Equipment |
|
| 60-Degree slant slide production lathe with 12 station disc turret, accepting 30VDI tooling, hydraulic operating cylinder and drawtube. This lathe utilises a Fanuc OiTD Control System with AC Servo axis drives and 15kw spindle drive giving a maximum spindle speed of 6000rev/min (A type) and 4000rev/min (B type). Automatic lubrication system to slideways and ballscrews. Linear rails on X and Z axes for friction less movement and rapid acceleration and deceleration, and for positional accuracy and repeatability. Fanuc dual check safety system. 600 UK custom Manual Guide Macros. | |
Chuck Package |
|
| 125mm Power chuck (A Type) | |
| or 170mm Power chuck (B Type) | |
| Accuracy chart | Machine Operating Manual |
| Coolant System | Toolkit |
| Footswitch for chucking | Totally Enclosed Working Area |
| Interlocked Guarding | Auto lubrication to slides |
| 10.4†Colour LCD | USB Interface |
| Manual Guide (MGi) | Ethernet Link |
| 512K Part Program Memory | Run Hour & Parts Counter |
| G10 Offset Value Settings | Multi Repetitive Cycles I & II |
| Canned Cycle For Drilling | G Code System A/B/C |
| Tool Wear / Geometry Offsets (64 pairs) | Direct Drawing programming |
| 2 Years parts and labour GE Fanuc warranty | Rigid Tapping |
| Background Editing |
Bar Package |
 |
| Accuracy chart | |
| CDC 42 Collet Chuck STD or DIN 6343 – Please Specify | |
| Coolant System | Parts catcher |
| Colchester MBF 1000 Barfeed Unit | Totally Enclosed Working Area |
| Interlocked Guarding | Spindle orientation |
| Machine Operating Manual | Toolkit |
| Footswitch for collet chuck | Auto lubrication to slides |
| 10.4†Colour LCD | USB Interface |
| Manual Guide (MGi) | Ethernet Link |
| 512K Part Program Memory | Run Hour & Parts Counter |
| G10 Offset Value Settings | Multi Repetitive Cycles I & II |
| Canned Cycle For Drilling | G Code System A/B/C |
| Tool Wear / Geometry Offsets (64 pairs) | Direct Drawing programming |
| 2 Years parts and labour GE Fanuc Warranty | Rigid Tapping |
| Background Editing | |