Europa Super 8BVS Bed Type Milling Machine
P.O.A
Description
Bed type construction to accommodate large and heavy workpieces. ISO 40 spindle with tilting head left and right to 45 degrees. One piece Meehanite cast iron construction. Upto 700kg table load to handle the largest of components with tables sizes upto 1575mm x 425mm. Electronic inverter controlled variable speed.
Specification | |
| Table size | 1524 x 305mm |
| Longitudinal traverse | 1050mm |
| Cross traverse | 500mm |
| Vertical traverse | 550mm |
| Maximum table load | 1000 kg |
| Quill travel | 152mm |
| Quill feeds | 0.04,0.08,0.15mm/rev |
| Quill diameter | 110mm |
| Quill taper | ISO 40 |
| Spindle motor inverter | 5.6 kw |
| Spindle speeds (inf. variable) | 55-3650 rpm |
| Spindle nose to table | 120-725mm |
| Spindle centre line to column | 506mm |
| Longitudinal and cross Power feed inverter | 1.5kw |
| Overall height | 2515mm |
| Overall depth | 1780mm |
| Overall width | 2360mm |
| Width of Y axis slideways | 520mm |
| Head tilt left or right | 0-90 degrees |
| Weight | 2800 kg |
| Machine in metric execution |
Standard Equipment |
| 7.5HP brake motor/7.5HP inverter 415V 3ph 50Hz |
| X/Y 1HP brake motors, Z ½ HP brake motor |
| X/Y/Z 1HP AC inverter drive control |
| X/Y axes fitted W/- ‘HTD’ belt drives |
| HD Head 4.33” 110mm quill, 6” 152mm stroke |
| Z manual brake |
| Quill feed dial indicator |
| Electromagnetic brake on spindle motor |
| CP4 ABEC7 Angular contact spindle bearings |
| C7 double nut X/Y/Z ballscrews |
| Turcite “B” on saddle X/Y Ways |
| Table hardened and ground, T slots ground |
| 4 handwheels W/- clutch lever |
| X front dual handwheels |
| Electric box W/- lockable main switch |
| Short arm halogen work light |
| Auto lube W/- alarm |
| Coolant system/pump |
| Heavy duty swarf tray |
| Heavy duty square over arm for control panel |
| Stainless steel front, rubber rear, Y way cover |
| X axis concertina way covers |
| Genuine meehanite castings |
| Y/Z square ways hardened/ground |
| Tools and tool box, parts list |
| Operation manual, test and accuracy chart |
| CE/EMC Equipment including:- Quill guard/cut-out switch, EMC filter CE approved contactors |
| Heavy duty back guard |
| Quill guard w/-cut-out switch and CSA on/off only |
| Air balance drawbar CE
|
